Description:

1.Set the unit with correct address code. If only one unit is connected to the system, .

 the address code must be set to "1". If there are multiple units, the order must be set to 

  "1,2,3,4 ... 8 ", and can only connect up to 8 units.

2. Connect the network cable according to the correct connection method (please refer to the network cable port wiring definition diagram).

3. Connect the corresponding amplifier and speaker group to the corresponding ports .

according to the correct wiring method Note The total power t ( : - o the single channels ). 250W

4.When plugging and unplugging the network cable, you must ensure that other devices .

connected to this device are powered off.

5.When connecting DC24V power supply the current must be 1A to the DC input .( > ) terminal pay attention 

  that the positive and negative cannot be connected in reverse

Features:

1.This unit is powered by external stabilized voltage supply of DC 24V current 1A. 

2.This selector can switch on/off manually through pressing the zone buttons on front panel, 

   and the zones also can be controlled by the zones button on the panel of digital paging console LH-13,and the 

   control mode adopts 485 signal control. 

3.Each unit has individual address code, and with RJ45 8-core network ports which 

   include one group 485 signal, one group balanced audio signal, one group DC24V. 

4.There is an emergency alarm short-circuit activation signal input terminal. Once a

  short-circuit signal is input, all zones can be switched on automatically . After the 

   short-circuit signal is removed, the original state is restored automatically 

5.12 channel constant 100V input signals, correspond with 12 output signals.

Specification:

ModelLH-13

Power Supply 24VDC

Power Consumption W13 W

Channels 12 channels

All channels output total power W3000W

Single channel output W250W

Dimensions (WxDxH) mm 485*155*500mm

Weight2.0Kg